When The Oven Is First Installed; Before First Use - Zanussi ZOU 594 Bedienungsanleitung

When the oven is first installed

Remove all packaging, both inside and
outside the oven, before using the oven.
When the oven is first connected to the electrical supply,
the display will automatically show 12:00 and the
symbol will flash.
Ensure the correct time of day is set before using the
oven.
To set the correct time of day:
a) while the symbol is flashing , set the correct time
of day by pressing buttons "
The time arrow symbol
seconds after the correct time is displayed (Fig. 2).
b) if the symbol is not flashing anymore, press
button twice (Fig. 3).
Then, proceed as described in point a).

Before first use

Before using for the first time, the oven should be heated
up without food.
To do that, proceed as follows:
— press button to switch on the oven.
— press button
"Conventional Cooking" function
4).
— set the temperature to 250 °C using the
increasing push button " ".
— Allow the oven to run empty for approximately
45 minutes.
— open a window for ventilation.
This procedure should be repeated with the "Fan
Cooking" and "Full Grill"
approximately 5-10 minutes.
During this time, an unpleasant odour may
be emitted. This is absolutely normal, and
is caused by residues of manufacturing.
" or " " (Fig. 1).
will disappear about 5
twice and select the
(Fig.
function for
electrolux 37
Fig. 1
Fig. 2
Fig. 3
Fig. 4
37