Activating/Deactivating The Alarm - Hama 106938 Bedienungsanleitung

Selecting 12 or 24-hour format
• Press the + button (3) to switch between the 12 and 24-hour formats.
5.3 Temperature display
• Press the wave °C/°F button (6) to choose between °C and °F for the temperature display.
5.4 Alarm
Note – Alarm
The alarm time always depends on the time displayed, that is, the local or time zone-shifted time (
Setting the alarm time
• Repeatedly press the mode button (5) to access alarm mode 1 (ALM1) or 2 (ALM2).
• Press and hold the mode button (5) to set the alarm time for the alarm displayed. The hours display begins
to flash.
• Press the + button (3) or the – button (4) to select the hour for the alarm time and confirm your selection
by pressing the mode button (5). The minutes display begins to flash.
• Repeat the process to set the minutes for the alarm time.
• Press the mode button (5) repeatedly to also set the other alarm mode or return to the temperature display.

Activating/deactivating the alarm

• Press the alarm on/off (7) repeatedly to activate/deactivate alarm 1 or alarm 2.
• If an alarm is activated, the corresponding symbol
Stopping the alarm/snooze function
• If the alarm is triggered, the alarm symbol
• Press the alarm on/off (7) to stop the alarm. Otherwise, it will stop automatically after 4 minutes.
Note – Snooze function
While the alarm signal is sounding, press the light / snooze button (2) to activate the snooze function.
The alarm symbol
after which it will sound again.
5.5 Dual Time settings and display
• Dual Time allows you to set and display a second, completely independent time.
• Press the mode button (5) repeatedly until DUAL TIME is displayed.
• Press and hold the mode button (5) for approximately 3 seconds. The hours display begins to flash.
Z
/ and Z will begin to flash. The alarm signal will be stopped for 4 minutes,
1
/ will be displayed.
1
/ will begin to flash and an alarm will sound.
1
).
F
7