Software Installations; Driver Setup Only (Lan-Ex); Powerline Networking Utility; Introduction Of Configuration Utility - Inter-Tech LineEX 450W Anleitung

2 Software Installation:
2.1 Driver Setup (only Line-Ex):
You need Administrator rights to install the Driver and Adapter Tool. Please log in to an Administrator Account. If
Windows detect the new Hardware cancel the Found Hardware Wizard.
Put the disc into your cd/dvd drive and start autorun.exe. Select the Button with text that matched your used
Operating system to install the driver. If you get a not signed Driver Message please select the install option and
press next. After finishing the Driver Installation press "Powerlan Utility" to install the Power Lan Utility. To read the
Manual press the Bottom "Manual". You need Adobe Acrobat to read the Manual.
‚

3 Powerline Networking Utility

Note. The Powerline Device can auto detect the other powerline bridges which plug in the same power
circuit, you
don't need to use this powerline utility except you want to encryption all the powerline devices as the
same group or
you cannot access the other computers.

3.1 Introduction of Configuration Utility

The Configuration Utility for Windows OS enables the user to find Powerline Ethernet devices on the Powerline
network; measures data rate performance, ensures privacy, performs diagnostics and secures Powerline networks.
Before install the utility, please check the windows edition of your computer. Before install powerline utility, you should install
"WinPcap" Utility in advance. You can easy to find the utility in the CD auto run screen. Please make sure your computer install
WinPcap first, otherwise the powerline utility can not work properly.
26