Led´s And Interface Powerline Pla200; Aes Protection - Inter-Tech LineEX 450W Anleitung

1.2.2 LED´S and Interfaces Powerline PLA200:
LED
Powerline
Ethernet
Flashing Data transferring.
POWER Flashing Flashing when "auto secure" is negotiating.
Interface
RJ-45 Port
Secure / Reset Button The Button can auto secure and group the Powerline devices, and reset to factory
On/Off Button

1.3 AES Protection:

If all of your Powerlan Adapter have a Bottom for simple Network protection you can press the Bottom from LineEx`s
Powerlan to secure your Network. See further Information in the Manual from your other adapters.
State
Powerline network activity.
Powerline Link Status;
ON
Green – Good
Orange – Normal
Red – Poor
OFF Search or no Powerline network activity.
Ethernet connection is OK.
ON Green – Ethernet in 100Mbps.
Red – Ethernet in 10Mbps.
OFF No Ethernet link.
ON Power on.
OFF Powerline off or failure.
Connect to the Ethernet Cable
default too.
Press 2 second for auto secure.
Press 10 seconds for generate new random encryption key.
Press > 15 seconds for reset to factory default.
Off can enable theStandby mode: This mode is energy saving mode, compl y with
EuP(ErP).
Description
Description
25