Grundig GTS 38271GC Bedienungsanleitung Seite 72

Program terminated prematurely for no reason.
• Loading door might be closed completely. >>> Ensure that the loading door
is properly closed.
• There might be a power outage. >>> Press the Start / Pause / Cancel
button to start the program.
• Water tank may be full. >>> Empty the water tank.
Clothes have shrunk, hardened or spoiled.
• A program not suitable with the laundry type might have been used.
>>> Check the maintenance labels on the clothes and select a program
suitable for the clothes.
Water drips from the loading door.
• Fibres might have gathered on the inner sides of the loading door and the
loading door gasket. >>> Clean the inner surfaces of the loading door and
the loading door gasket surfaces.
Loading door opens by itself.
• Loading door might be closed completely. >>> Push the loading door until
the closing sound is heard.
Water tank warning symbol is on/flashing.
• Water tank may be full. >>> Empty the water tank.
• Water discharge hose might have collapsed. >>> If the product is
connected directly to the water drain check the water discharge hose.
The lighting inside the drying machine does not turn on. (In models with lamp)
• The drying machine might not have been turned on using On/Off button.
>>> Check that the drying machine is turned on.
• Lamp might be malfunctioning. >>> Contact Authorized Service to replace
the lamp.
Anti-crease icon is lit.
• Anti-Crease mode that prevents the laundry in the drier to crease may be
activated. >>> Turn the drier off and remove the laundry.
Fibre filter cleaning icon is lit.
• Fibre filter (interior and exterior filter) may be unclean. >>> Wash the
filters with warm water and dry..
• A layer may be formed on the fibre filter pores that leads to clogging. >>>
Wash the filters with warm water and dry.
• Fibre filters may not be inserted. >>> Insert the interior and exterior filters
to their places.
An audible warning is heard from the machine
• Fibre filters may not be inserted. >>> Insert the interior and exterior filters
to their places.
Evaporator warning icon is flashing.
• Evaporator front side may be clogged with fibres. >>> Clean the front side
of the evaporator.
• Fibre filters may not be inserted. >>> Insert the interior and exterior filters
to their places.
72