Herunterladen Inhalt Inhalt Diese Seite drucken

Installation; Appropriate Installation Location; Removing The Transportation Safety Assembly - Grundig GTS 38271GC Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

4. Installation

Before the calling the nearest
Authorized Service for the
installation of the dryer, ensure that
electrical installation and water drain
is appropriate referring to the user's
manual. If they are not suitable,
contact a qualified electrician and
technician to make necessary
arrangements.
C
Preparation of the dryer's
location as well as the
electrical and waste water
installations is under
customer's responsibility.
A
Prior to installation, visually
check if the dryer has any
defects on it. If the drier
is damaged, do not have
it installed. Damaged
products cause risks for
your safety.
A
Let your dryer wait for 12
hours before starting to use
it.
4.1 Appropriate installation
location
• Install the dryer on a stable and
level surface.
• Dryer is heavy. Do not move it by
yourself.
• Operate your dryer in a well
ventilated, dust-free environment.
• The gap between the dryer and
the surface should not be reduced
by the materials such as carpet,
wood and tape.
• Do not cover the ventilation grills
of the dryer.
• There must not be a lockable,
sliding or hinged door that may
block the opening of the loading
door in the place where your
dryer is to be installed.
• Once the dryer is installed, it
should stay at the same place
where its connections have been
made. When installing the dryer,
make sure that its rear wall does
not touch anywhere (tap, socket,
etc.).
• Place the dryer at least 1 cm
away from the edges of other
furniture.
• Your dryer can be operated at
temperatures between +5°C and
+35°C. If the operating conditions
fall outside of this range,
operation of the dryer will be
adversely affected and it can get
damaged.
• The rear surface of the tumble
dryer shall be placed against a
wall.
B
Do not place the dryer on
the power cable.
4.2 Removing the transportation
safety assembly
A
Remove the transportation
safety assembly before
using the dryer for the first
time.
A
If the door swing side of
your appliance can be
modified, see the reversible
door mounting instructions
DE
EN
53

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis