Changing The Programme After It Has Started - Grundig GTS 38271GC Bedienungsanleitung

C
Child Lock is deactivated
when the machine is
switched off and on with
On/Off/Cancel button.
• When the Child-proof Lock is
activated:
• Display symbols will not change
even if the position of Programme
Selection knob is changed while
the machine is running or in halt.
6.9 Changing the programme
after it has started
After the machine starts, you can
change the selected programme
and dry your laundry in a different
programme.
1. If you want to select Extra Dry
programme instead of Iron Dry
programme, press and hold the
Start / Pause button for 1 second
to stop the programme.
2. Select Extra Dry programme by
turning the Programme Selection
knob.
3. Press the Start / Pause button to
start the program.
Adding / removing laundry in Pause
mode
In order to add or take out laundry
after the drying programme has
started:
1. Press Start / Pause button to
switch the machine to Pause
mode. Drying process will stop.
2. While in Pause mode, open the
loading door, add or take out
laundry and close the loading
door.
3. Press the Start / Pause button to
start the program.
C
Any laundry added after the
drying process has started
may cause the clothes that
are already dried in the
machine intermingle with
wet clothes and the result
will be wet laundry after the
drying process is over.
C
You may repeat laundry
adding or removing process
as many times as you desire
during drying. However,
this process will increase
the programme time
and energy consumption
since the drying process
will be interrupted
repeatedly. Therefore, it
is recommended to add
laundry before the drying
programme has started.
C
If you select a new
programme by turning
the Programme Selection
knob while your machine
is in Pause mode, then the
current program is aborted
and new programme
information is displayed.
CAUTION: Do not touch the
inner surface of the drum
when adding or taking out
laundry while a programme
is running. Surfaces of the
drum are hot.
DE
EN
65