Auxiliary Functions; Warning Symbols - Grundig GTS 38271GC Bedienungsanleitung

6.5 Auxiliary functions

Audio Warning
The machine will give an audio
warning when the programme comes
to an end. Use the Audio Warning
Level button to adjust the sound
level.
C
You can change the sound
level either before the
programme starts or
while the programme is in
progress.
Anti-creasing
A 2-hour anti creasing program to
prevent laundry from creasing will
be activated if you do not take the
laundry out after the program has
come to an end. This programme
rotates the laundry in 10-minute
intervals to prevent creasing.

6.6 Warning symbols

C
Warning symbols may differ
according to the model of
your machine.
Lint filter cleaning
When the programme is completed,
a warning symbol will appear to
remind that the filter needs to be
cleaned.
C
If the Filter Cleaning
symbol flashes
continuously, refer to
"Troubleshooting" section.
C
For further programme
details, see, "Programme
selection and consumption
table".
Water tank
When the programme is completed,
a warning symbol will appear to
remind that the water tank needs to
be drained.
If the water tank becomes full while
the programme is running, the
warning symbol will start to flash
and machine will pause. Drain the
water in the water tank and press
Start / Pause button to resume the
programme. The warning symbol
turns off and the programme
resumes operating.
Filter drawer /Heat exchanger
cleaning
When the programme is finished,
the cleaning symbol of the heat
exchanger or filter drawer may light
up.
End Time Setting
End Time Setting function allows
you to delay the ending time of the
programme up to 24 hours.
DE
EN
63