oneConcept Beaufort Bedienungsanleitung Seite 36

#* Setting/Options
1 Switch between display of absolute and relative air pressure.
2 Switch units hPa / inHg / mmHg.
3** Set the Relative Pressure value.
4 Set alarm for high air pressure: Tap +/- and ON/OFF for setting the high pressure
alarm. When active, a corresponding icon will be displayed.
5
Set alarm for low air pressure: Tap +/- and ON/OFF for setting the low pressure
alarm. When active, a corresponding icon will be displayed.
6 Display the maximum air pressure record. The maximum record will be fl ashing and
corresponding MAX icon will be displayed. Tap the fl ashing max value for 3s to re-set
the maximum value to current value.
7
Display the minimum air pressure record. The minimum record will be fl ashing and
corresponding MAX icon will be displayed. Tap the fl ashing max value for 3s to re-set
the maximum value to current value.
* Number of tapping necessary to open the respective sub-menu
**When in step 1 absolute airpressure is selected, point 3 (set relative value) is inactive and will be ignored.
***Tap the bar graph to switch between display modes 12h/24h.
36
Pressure: