auna Soundstorm 2.0 Bedienungsanleitung Seite 14

• Press the MODE button to select the Aux in mode.
• Connect an audio cable (not included) to the AUX IN JACK of the speaker and to the audio output socket
on the external audio devices such as MP3 player, laptop PC, etc.
• Play from your external audio device.
• Press MODE to change to radio mode.
• Press for a complete station scan.
• All found stations will be stored automatically.
• Press / - or
• You can also use the HPLAY_LIGHT app to operate the FM radio functions of this device.
• Press MODE to select USB mode.
• Insert a USB drive into the USB port. If compatible data (MP3/WAV) is contained, the playback starts
automatically after a short moment.
• Use ,
• Press and hold EQ/FD to select the next folder (if applicable).
• You can also use the HPLAY_LIGHT app to operate the USB playback functions of this device.
Connect microphones or guitars to the correspondingly marked input sockets on the SOUNDSTORM 2.0.
You can combine the guitar or microphone signals with music from any other sources (USB/BT or radio).
• Before connecting, turn the MIC VOLUME down completely.
• Press MODE repeatedly to select the desired music source (if desired) and start the playback.
• Adjust the mic or guitar volume with the MIC VOL knob.
Volume: Turn the VOLUME LEVEL CONTROL to adjust the volume of the speaker.
Echo: Turn the ECHO LEVEL CONTROL to adjust the echo effect.
EQ: Press EQ/FD repeatedly to cycle through the EQ presets FLAT - CLASSIC - ROCK - POP - JAZZ.
Light effects: Press the LIGHT button to switch the lights on/off.
14
AUX-Funktion
/ + to cycle through the stored stations.
and to navigate through your music library.
Connecting a microphone/guitar
Sound, Volume and Light Effects
Radio
USB
www.auna.de