Safety; General Safety Instructions; Recommendations; Liabilities - Baxi PRIME 1.24 Betriebsanleitung Für Den Benutzer

1.

SAFETY

1.1

General safety instructions

SMELL OF GAS
• Switch off the boiler.
• Do not activate any electrical device (such as switching on the light).
• Put out any naked flames and open the windows.
• Call an Authorised Service Centre.
SMELL OF COMBUSTION FUMES
• Switch off the boiler.
• Open all the doors and windows to ventilate the room.
• Call an Authorised Service Centre.
FLAMMABLE MATERIAL
Do not use and/or store highly flammable material (thinners, paper, etc.) near the boiler.
SERVICING AND CLEANING THE BOILER
Switch off the boiler before working on it.
Once a year, have the device serviced by a qualified technician who should provide an undersigned maintenance certificate.
1.2

Recommendations

Only qualified technicians are authorised to service the device and system.
The appliance is not intended to be used by persons with reduced physical, sensory or mental capacities, or who lack
experience or knowledge, unless, through the mediation of a person responsible for their safety, they have had the benefit
of supervision or of instructions on the use of the appliance.
Make sure that the device remains physically connected to the mains to ensure that the safety functions, like the pump anti-
block function and frost protection, continue to operate.
Do not leave any packaging (plastic bags, polystyrene, etc.) within the reach of children as they are a potential source of danger.
Periodically check the pressure of the system (minimum pressure 0.8 bar, recommended pressure 1-1.5 bar).
Do not remove or cover the identification plates and labels on the device. These must remain visible for the entire useful life
of the device.
Failure to observe the above will render the warranty null and void. Prior to commissioning, remove the protective plastic
coating from the boiler. Do not use any tools or abrasive detergents to do this as you may damage the painted surfaces.
1.3

Liabilities

1.3.1 RESPONSIBILITIES OF THE PRODUCER
Our products all have marking. As our company constantly strives to improve its products, it reserves the right to modify the
information given in this document at any time and without notice. This document is issued purely for the sake of information and
should not be considered as a contract with third parties. As the producer, we cannot be held responsible for the following:
• Failure to observe the instructions on installation of the device.
• Failure to observe the instructions on use of the device.
• Negligent or insufficient maintenance of the device.
1.3.2 RESPONSIBILITIES OF THE INSTALLER
The installer is responsible for installation and commissioning of the device. The installer must follow the instructions below:
• Read and observe the instructions in the manuals provided with the device.
• Install the device in compliance with the laws and standards in force.
• Perform commissioning and all necessary checks.
• Explain installation to the user.
• With regard to maintenance, inform the user of the need to check the device regularly and to keep it in good working order.
• Provide the user with all the instruction manuals.
3 7679406 (01-05/17)