Maxi-Cosi Citi SPS Bedienungsanleitung Seite 9

EN
Shell
1
Carrying handle
2
Instructions and airbag sticker
3
Instruction manual
4
Warning sticker
5
Slots for adjusting the shoulder belts
6
Shoulder belts
7
Buckle of the harness belt
8
Quick-adjuster button
9
Belt for adjusting the shoulderbelt with one hand
10
Belt hook at the rear for shoulder belt of the
11
3-point seat belt
Belt hook for the lap belt of the 3-point seat belt
12
Removable cover
13
Push button for adjusting the carrying handle
14
Push button for releasing Maxi-Cosi Citi SPS
15
from pushchair
Sun canopy
16
Support pillow
17
Storage compartment
18
Belt protectors
19
16
Safety
General Maxi-Cosi Citi SPS instructions
1. You are personally responsible for the safety of
your baby at all times.
2. Never hold your baby on your lap when driving.
3. Do not use the Maxi-Cosi Citi SPS for more than
5 years.
4. Do not use second-hand products where the
history is unknown.
5. Replace the Maxi-Cosi Citi SPS after an accident.
6. Read this instruction manual carefully and keep
it in the storage compartment in the
Maxi-Cosi Citi SPS.
Warning: Do not make any changes to the
Maxi-Cosi Citi SPS whatsoever, as this could affect
the performance of the car seat and render it
unsafe.
Maxi-Cosi Citi SPS maintenance instructions
1. The Maxi-Cosi Citi SPS must undergo regular
maintenance. Do not use lubricants or aggressive
cleaning agents.
2. The cover, cushions and belt pads of the
Maxi-Cosi Citi SPS can be removed in order
for these to be cleaned. The flexible plastic edge
can be cleaned with water, soap and a soft
cloth.
3. If the cover needs to be replaced at any time,
only use official Maxi-Cosi fabrics.
The Maxi-Cosi Citi SPS and your baby
1. Never leave your baby unattended.
2. Always secure your baby with the harness belt.
3. Before every use, make sure the harness is not
damaged or twisted.
4. Make sure you can fit no more than one finger
between the harness and your baby (1cm).
5. Only use the headrest of the Maxi-Cosi Citi SPS
when the shoulder belts are in the lowest
position.
Warning: Never place the Maxi-Cosi Citi SPS on an
elevated surface (such as a table or chair).
Maxi-Cosi Citi SPS car use
1. Always check to make sure the car seat can be
installed properly in your car before purchasing
it.
2. Make sure any fold-down rear seat is locked into
position.
3. Prevent the Maxi-Cosi Citi SPS from becoming
trapped or weighed down by luggage, seats
and/or slamming doors.
4. Make sure that all luggage and other loose
objects are secure.
5. The safest place for your baby is the rear of your
vehicle, however if you need to install the seat in
the front passenger seat, please ensure that the
front airbag is deactivated.
6. Only use a forward-facing seat that is fitted with
a 3-point safety belt that complies with the ECE
R16 standard (at a minimum).
7. Make sure the car safety belt buckle runs in a
straight line and stays below the belt hook of the
Maxi-Cosi Citi SPS. See the p.8 example.
8. The car safety belt must be threaded along
all blue markings. For proper installation
instructions, see pages 8-9 and/or the sticker
on the side of the Maxi-Cosi Citi SPS.
9. Always cover the Maxi-Cosi Citi SPS when
exposed to direct sunlight in the car. Otherwise,
the cover, metal and plastic parts could become
too hot for your child's skin.
Warning: The Maxi-Cosi Citi SPS may only be
installed in a rear-facing position in the car.
Maxi-Cosi Citi SPS in aeroplanes
• Installing the Maxi-Cosi Citi SPS with a 2-point
safety belt is only allowed when used in an
aircraft.
• In an aircraft, the Maxi-Cosi Citi SPS may only be
used on forward-facing passenger seats.
EN
17