Herunterladen Diese Seite drucken

PeakTech 5185 Bedienungsanleitung Seite 36

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

11. Battery Replacement
If the
-Symbol appears in the display the battery should be replaced.
Open the unit as described in section 5.1 and remove the old battery and put in a
new one of the same type (3.6V Li-battery).
Used batteries are hazardous waste and must be placed in the appropriate
collection container.
If the device is not completely closed, it should not be put into operation.
Note:
1.
Keep the device dry.
2.
Hold the Sensors clean.
3.
Keep the unit out of reach of children.
4.
If the "
" symbol appears, the battery is exhausted and should be replaced
as soon as possible. If you are using a battery, pay attention to correct polarity
of the battery. If you do not need the device for an extended period, remove
the battery from the device.
11.1. Notification about the Battery Regulation
The delivery of many devices includes batteries, which for example serve to
operate the remote control. There also could be batteries or accumulators built into
the device itself. In connection with the sale of these batteries or accumulators, we
are obliged under the Battery Regulations to notify our customers of the following:
Contaminated batteries shall be marked with a symbol consisting of a
crossed-out refuse bin and the chemical symbol (Cd, Hg or Pb) of the heavy
metal which is responsible for the classification as pollutant:
„Pb" stands for lead and „Hg" for mercury.
Please dispose of old batteries at a council collection
point or return them to a local shop at no cost. The
disposal in domestic refuse is strictly forbidden
according to the Battery Regulations. You can return
used batteries obtained from us at no charge at the
address on the last side in this manual or by posting
with sufficient stamps.
-35-
„Cd" for cadmium,

Werbung

loading

Diese Anleitung auch für:

51865187