Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.2. Software Installation
To take the data logger into operation, the PC software must be installed from the
CD first.
Please insert the software CD into the CD / DVD drive of your PC. If the program
does not run automatically, double click the "setup.exe" file and install it in any
folder on your hard drive.
Follow the onscreen instructions to complete the installation.
It appears a new symbol "Datalogger Graph" on the desktop.
Please note that you must install the USB drivers after installing the software in
order to use the Data Logger software.
5.3. Installing the USB driver
After completing the software installation, make sure that the software CD is
inserted into your CD / DVD-ROM drive of your PC.
Double-click on the file "USBXpressInstaller.exe" in the folder "Driver" on the CD to
begin the installation.
Follow the onscreen instructions to complete the installation of the USB driver.
You can now plug the data logger into a free USB port of your PC.
A moment later, your computer will display a message that the driver for the data
loggers were fully installed and the device can be used now.
Now, you have successfully installed the required software and USB drivers for
your data logger.
Note:
The device can be used only in conjunction with the Software and is not recognized
as an external hard disk.
-26-
Werbung
