Herunterladen Diese Seite drucken

PeakTech 5185 Bedienungsanleitung Seite 34

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

10. Technical Data
General:
Memory
Sample-Rate
Measurement Start
Measurement Stop
LED-Display
Protection class
Battery
Battery Life
Dimensions (WxHxD)
Weight
64k Bytes (32.000 Measurement Values)
adjustable from 10 seconds to 12 hours
Immediately; Start by pressing button;
Start by pre-set of Time/Date
Measuring stops, if memory is full
Measuring stops, when preset
measurement point has been reached
Red and green LED
Status display of the data logger:
Includes the delay of the start of the
measurement, display with recording of
measured values (logging), alarm and
measurement completed
Using the software, these two LEDs can
be turned off to save the battery voltage.
Yellow LED
Display low battery status
IP 20
½ AA 3.6V Lithium-Battery 1200mAh
Up to 2 years depending on the setting of
the measuring rate and the LED display
38 × 122 × 22 mm
60g
-33-

Werbung

loading

Diese Anleitung auch für:

51865187