Snom 300 Kurzanleitung Seite 9

Initializing and registering the phone
Please note: You will need the registration information received from your
Internet service provider or your network administrator - normally the phone or
extension number, the password, and the registrar.
After you have set up the phone and connected it to the network as shown on pages
2 - 5, the phone begins to initialize.
Normally the initialization is completely automatic, using DHCP. If your network does not
support DHCP, you must obtain the IP address, netmask, IP gateway, and DNS server
from your Internet service provider or your network administrator and enter them manually
when you are asked to do so on the display.
Watch the display and, when asked to, make selections with
1. Language. The default is English. Other languages are available if the phone/
network is connected to the Internet during initialization, so that they can be
provided from the snom server automatically (fi rmware 7 and higher).
2. Dial tone
3. Time zone
4. Enter the account number. Save with P.
5. Enter the registrar. Save with P . The display now shows the idle screen:
Account
Entering numerals, letters, and special characters
The current input mode is indicated on the display by "123" (digits), "abc" (small
letters), "ABC" (capital letters).
Change input mode
q
Move cursor to the left
t
Entering special characters and symbols in letter input mode: Press "1" key one or
more times quickly, with a pause after each character. Examples:
1x = "."
156 16:05
*Off
p Delete sign to the left of the cursor
u Move cursor to the right
2x = "+" 3x = "@"
snom 300 Quick Start Guide
and save with
Time
Currently used
audio device
4x = "1" 5x = ":"
E
N
G
L
I
S
H
.
9