Herunterladen Inhalt Inhalt Diese Seite drucken

Mounting In An Outercontainer - Independence Annular Classic 20 Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

13. Bundle the lines in 3x3 "8-shapes". Do not bundle
thelast 60cm of the lines.
Attention: You have to use new rubber-bands for the
line-bundles and the container everytime the
parachute is packed.
15. Roll in the drogue parachute. (Not necessary at Piccolo
classic, because Piccolo Classic does not have a drogue-
chute.)

17. Mounting in an outercontainer

1. Stow the relaese-handle at the loop in the middle of the
innercoantainer. Place the bridle at the side of the container
which you prefer.
Note: The tandem-versions have a V-shaped
bridle!
(On this picture an innercontainer without drogue-chute is shown)
14. Close the container with the lines. First in the middle
then the sides.
2. Close the two lateral flaps of the outercontainer with two
packing-cords and closed it with the pins of the handle
provisionally.

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis