Removing The Rechargeable Shaver Battery - Philips S99xx Bedienungsanleitung

Environment
- Do not throw away the shaver and the SmartClean
system with the normal household waste at the end of
their life, but hand them in at an official collection point
for recycling. By doing this, you help to preserve the
environment.
- The built-in rechargeable shaver battery contains
substances that may pollute the environment. Always
remove the battery before you discard or hand in the
shaver at an official collection point. Dispose of the
battery at an official collection point for batteries. If you
have trouble removing the battery, you can also take the
shaver to a Philips service centre. The staff of this centre
will remove the battery for you and will dispose of it in
an environmentally safe way.

Removing the rechargeable shaver battery

Only remove the rechargeable battery when you discard
the shaver. Make sure the battery is completely empty
when you remove it.
Be careful, the battery strips are sharp.
1 Insert the screwdriver into the slot between the
front and back panel in the bottom of the appliance.
Remove the back panel.
2 Remove the front panel.
3 Unscrew the two screws at the top of the inner
panel and remove the inner panel.
4 Remove the rechargeable battery with a screwdriver.
ENGLISH
31