Safety Warnings - Ferm WSM1009 Originalbetriebsanleitung

WALL SLOTTER
WSM1009
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.

SAfETy WARnIngS

1
WARNING
Read the enclosed safety warnings,
the additional safety warnings and
the instructions.
Failure to follow the safety warnings and
the instructions may result in electric
shock, fire and/or serious injury.
Keep the safety warnings and the
instructions for future reference.
The following symbols are used in the user
manual or on the product:
1
Read the user manual.
2
Risk of personal injury.
3
Risk of electric shock.
4
Immediately remove the mains plug from
the mains if the mains cable becomes
damaged and during cleaning and
maintenance.
5
Wear safety goggles. Wear hearing
protection.
A
Wear a dust mask.
B
Caution: Laser beam! Do not look
directly into the laser beam. Do not point
the laser beam at humans or animals.
6
Risk of flying objects. Keep bystanders
away from the work area.
6
7
Double insulated.
8
Do not dispose of the product in
unsuitable containers.
9
The product is in accordance with the
applicable safety standards in the
European directives.
ADDITIOnAL SAfETy WARnIngS fOR WALL
SLOTTERS
● Do not work materials containing asbestos.
Asbestos is considered carcinogenic.
● Wear safety goggles, hearing protection and if
necessary other protective means, such as
safety gloves, safety shoes, etc.
● Before use, remove all nails and other metal
objects from the wall.
● Be aware of hidden pipes and wiring when
cutting slots into walls.
● Always hold the machine with two hands.
● Do not use the machine without the guard.
● Inspect the cutting discs before each use.
Do not use cutting discs which are bent,
cracked, or otherwise damaged.
● Make sure that the cutting discs are properly
mounted.
● Make sure that the cutting discs rotate in the
correct direction.
● Do not use the machine with the cutting discs
facing upwards or to the side.
● Only use cutting discs that are suitable for use
with the machine.
● Only use cutting discs with the correct
dimensions.
● Do not use other accessories than cutting discs.
● Do not use the machine when a maximum slot
depth is required that exceeds the maximum
slot depth of the cutting discs.
● Make sure that your hands do not touch the
rotating parts.
● Always work in the correct working direction
(see indication on the base).
● Let the machine run at no load in a safe area
after mounting the cutting discs. If the machine
vibrates strongly, immediately switch off the
machine, remove the mains plug from the
mains, and try to solve the problem.
● Beware that the cutting discs continue to
rotate for a short period after switching off the
machine. Do not attempt to bring the cutting
discs to a standstill yourself.