Technical Data; Declaration Of Conformity - Bosch GWS Professional 1000 Originalbetriebsanleitung

26 | English

Technical Data

Angle Grinder
Article number
Rated power input
Output power
Rated speed
Grinding disc diameter, max.
Thread of grinder spindle
Thread length (max.) of grinder
spindle
Reduced starting current
Constant electronic control
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.

Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 2006/42/EC.
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
05.03.2010
1 609 929 W53 | (24.3.10)
GWS 1000
Professional
3 601 H21 0..
3 601 H21 4..
W
W
-1
min
mm
mm
kg
Dr. Eckerhard Strötgen
Head of Product
Certification
GWS 1000
Professional
3 601 H21 8.. 3 601 H22 0.. 3 601 H24 8..
1000 1000
630 630
11000 11000
115 125
M 14 M 14
22 22
–
–
2.1 2.1
/II /II
Assembly
Mounting the Protective Devices
Before any work on the machine itself, pull
the mains plug.
Note: After breakage of the grinding disc during
operation or damage to the holding fixtures on
the protection guard/power tool, the machine
must promptly be sent to an after-sales service
agent for maintenance (for addresses, see sec-
tion „After-sales Service and Customer Assist-
ance".
GWS 1100 GWS 1400
Professional Professional
1100
660
11000
125
M 14
22
–
–
2.0
/II
Bosch Power Tools
1400
820
11000
125
M 14
22
2.2
/II