Troubleshooting Guide - Teka TGI 120.1D Gebrauchsanweisung

Trouble Shooting Guide
During the service, you can come across some troubles that in most
cases result from improper handling of the appliance and can easy be
eliminated.
The Appliance Fails to Operate After Connecting to the
Mains Supply
• Check the voltage in the socket and see if the appliance is switched
on (green signal lamp is on).
Sound alarm, red signal lamp is on
If the temperature within the freezer is too high, it is signaled by the red
signal lamp and the sound alarm, which may be switched off by
pressing the alarm off button (3). When the lamp goes off the interior of
the freezer has again reached the appropriate temperature.
Another increase of temperature within the freezer is again signaled
both by the red lamp and the sound alarm.
The reasons for this may be the following:
• The door was frequently opened or it was left opened for too long.
• The door is not properly closed (the door may sag, the gasket may be
polluted or damaged).
• Power supply has been interrupted for a longer period of time.
• Perhaps you have overloaded the appliance with fresh foods.
The alarm sounds, red lamp is off
Excessive dust on the condenser or around the air circulation openings
in the bottom rail may set off the sound alarm. It may be switched off by
pressing the alarm off button (3).
Clean the condenser and the air circulation openings in the bottom rail
(consult the Section Cleaning of the Appliance).
48 Instructions for Use