Trouble Shooting Guide - Atag KS1088CUU Gebrauchsanweisung

instructions for use

trouble shooting guide

the appliance fails to operate after connecting to the
mains supply
the red light is on
continuous operation of the cooling system
the door is hard to open
66
During the service, you can come across some trou-
bles that in most cases result from improper handling
of the appliance and can easy be eliminated.
· Check the supply in the outlet socket and make sure
the appliance is switched on.
· The door was frequently opened or it was left
opened for too long.
· The door is not properly closed (the door may sag,
the gasket may be polluted or damaged).
· Power supply has been interrupted for a longer
period of time.
· Perhaps you have overloaded the appliance with
fresh foods.
· Set the thermostat knob from the position for
continuous to the position for automatic operation.
· The reason may be inadequate ventilation of the
compressor and condenser (assure adequate air
circulation behind the appliance and wipe the dust
from the condenser).
If you want to open the door that has just or recently
been closed, you may find it hard to open. The rea-
son why this happens is, that when you open the
door, warm air gets into the appliance and when it is
cooling, the underpressure seals the door. After few
minutes (5-10), the door can easily be opened.