Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting - Francis Francis Illy Metodo Iperespresso Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 32
PROBLEM
The power supply cable is not
plugged in to the power socket.
The machine does not
turn on.
The main on/off switch "M" is po-
sitioned on "0".
No water in the tank.
The capsule is not inserted in the
capsule compartment.
The capsule inserted does not
dispense coffee.
The moveable part of the top of
the machine is not completely
closed.
The coffee dispensing button has
not been pushed.
The water tank has not been cor-
The machine does not
rectly inserted.
dispense coffee.
Scaling of components.
The pump did not prime.
Incorrect type of capsule.
21
CAUSE
Connect the plug to a power outlet meeting the
technical specifi cations given on the data plate "O".
Position the main on/off switch "M" on "I".
Fill tank "L" with water.
Insert a capsule in the capsule compartment "B".
Lift the lever "A", remove the capsule, close the
compartment to dispense a small amount of water,
reopen the compartment "A", insert the capsule
again, lower the top until it locks in position and
press the coffee brew button "F". If coffee is not
dispensed, discard the capsule.
Make sure that a capsule has been inserted into the
capsule compartment "B", lift the lever "A", lower
it again with some force as far as it will go. Press
until you feel the lever "A" lock and press the coffee
brew button "F".
Press the coffee brew button "F".
Insert the water tank "L" completely into the machi-
ne until it clicks fi rmly into place.
Descale the machine as described in the related
paragraph.
Check that the capsule compartment "B" is devoid
of capsules, lower the lever "A" to the locked posi-
tion, press the coffee brew button "F" to dispense
water. Try to dispense a coffee with a capsule.
Turn the machine off by positioning the main on/off
switch "M" to "0" and let it cool for at least 10 minu-
tes. Turn it on, by positioning the main on/off switch
"M" to "1", wait until the temperature OK indicator
"F" is on, verify that the capsule compartment "B" is
devoid of capsules and try to dispense water.
Make sure to use capsules for household use, iden-
tifi able by "single-dose household ground coffee
capsules" on the packaging and not capsules for
professional use identifi able by "For professional
use only" on the packaging.
SOLUTION
EN
If problem
persists
Contact an
authorized
Service
Center.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Y1

Inhaltsverzeichnis