Cup Stand Adjustment; Making Coffee - Francis Francis Illy Metodo Iperespresso Bedienungsanleitung

CUP STAND ADJUSTMENT

The Y1 machine is designed to be used with either mugs or
espresso cups.
To adjust the height of the cup stand "H" you must remove
it by pulling it out and then set it in the mug or espresso cup
position.
Optimal position for mugs, suitable for "long" coffee.
Optimal position for espresso size cups.
Note: the height of the cup stand "H" must be adjusted before
you start dispensing coffee.
17

MAKING COFFEE

The Y1 machine is designed to function exclusively with illy "Me-
todo Iperespresso" capsules.
To avoid damage to the machine, do not use other types of
capsules.
Make sure the temperature OK indicator "F" is on. Do not make
coffee if the indicator "F" is off.
Unlock and lift the opening lever "A" of the capsule compart-
ment "B".
Note: if a capsule is present in the compartment "B", it will be
automatically expelled when the compartment is opened. The
capsule must slide easily into the compartment; if this is not
the case take it out and reposition it correctly.
Insert the capsule as shown in the picture.
EN