Werbung
only for a short while, as proximity to water
involves a risk, even if the appliance is
disconnected.
- Unplug the appliance from the mains
when not in use and before undertaking any
cleaning task.
- This appliance is for household use only,
not professional or industrial use.
- This appliance is intended for adult use.
Ensure that this product is not used by the
disabled, children or people unused to its
handling.
- This appliance should be stored out of
reach of children and/or the disabled.
- Do not put the appliance away if it is still
hot.
- It is advisable to use distilled water,
especially if the water in your area contains
clay or if it is "hard" (containing lime or
magnesium).
- Check the condition of the security plug
joint periodically.
- Check that the safety lid is fully screwed
tight before switching the appliance on.
- Do not use the appliance on any part of
the body of a person or animal.
- Any misuse or failure to follow the
instructions for use renders the guarantee
and the manufacturer's liability null and
void.
instructions for use
Before use:
- Prepare the appliance according to the
function you wish to use:
insertion of accessories into the
appliance's grip:
- The rotating nozzle is designed in such
a way that it allows the insertion of the
following accessories (use the combination
that best meets your requirements):
- Upholstery brush: Especially for cleaning
fabric surfaces. Attach the accessory into
the rotating nozzle and turn the accessory
in the direction according to arrow
(clockwise), until the line on the accessory
coincides with the double line marked on
the nozzle (Fig. 1).
- Cloth: Place over the upholstery brush.
- Window wiper accessory: Attach the lip
of the window wiper accessory over the
hooks of the upholstery brush and press
from the lower part of the accessory until
the two parts are completely joined (Fig.
2). To detach the window wiper accessory
from the brush, lift up the lip situated on
the under side of the accessory and pull
outwards until they separate (Fig. 3).
- Round brush: Especially for removing
resistant grease and dirt. Attach the
accessory into the rotating nozzle and
press (Fig.4).
- 90º angled nozzle: Especially for difficult
to reach areas. Attach the accessory into
the rotating nozzle and press (Fig. 4).
- Elongated nozzle: Especially for difficult
to reach areas. Attach the accessory into
the rotating nozzle and turn the accessory
in the direction according to arrow
(clockwise), until the line on the accessory
coincides with the double line marked on
the nozzle (Fig. 1).
Werbung
