NEFF D7010X0 Gebrauchsanleitung Und Montageanleitung Seite 10

7. Drill the 8 mm l mounting boreholes at
top right and bottom middle.
Insert wall plugs.
The wall plugs must be suitable for the
brickwork.
8. Detach the plug from the cable.
9. Feed the cable through the cable
conduit.
10
Installation
10. Hold the fan in position and screw to
the wall.
The fan is connected to the extractor
hood with the Z 5 m extension cable
enclosed with the extractor hood.
If an additional extension cable is required,
the exterior of the fan housing must be
earthed by an electrician before the
housing is screwed into position.
The parts used for earthing must not come
into contact with the fan impeller.
11. Re-attach the plug to the cable.
Ensure that the wires are connected to
the correct terminals.