Storage; Environment - Blaupunkt Lavender 2041 Bedienungsanleitung

www.blaupunkt.com LV 2041
3. Filter replacement force mode
Suppose you use the appliance under air pollution environment, you can replace
these filters even the light does not flash, the filters replacing method is same,
please see chapter: Filter replacement.
To force reset the filter's lifetime:
1) Switch on the appliance at the standby mode(Not press the button), press
and hold the button for 5 seconds, filters light will flash.
Note: Press button or without any operation for 60 seconds, the appliance will
exit the Filter replacement force mode.
2) Press button repeatedly to choose the filter, the chosen filter light will stop
flash, press and hold button for 3 seconds, this filter light turn off and the
reset finish.
3) You can repeat step 2 operation to turn off the other filters light and finish all
filters reset.

STORAGE

To store the mains cord, remove the back cover, wind it round the cord storage
facility at the bottom of the appliance, then reattach the back cover.

ENVIRONMENT

Do not throw away the appliance with the normal household waste at the end of its
life, but hand it in at an official collection point for recycling. By doing this, you
help to preserve the environment.
14