Filter Replacement - Blaupunkt Lavender 2041 Bedienungsanleitung

www.blaupunkt.com LV 2041

FILTER REPLACEMENT

When one of the filters is almost full and has to be cleaned or replaced, the
appropriate filter replacement light starts to flash. Filter replacement light 1
flashes: filter 1 (the pre-filter) has to be cleaned, see chapter"Cleaning" 5.3 for
further instructions. Filter replacement light 2 flashes: filter 2(charcoal filter) has
to be replaced. Filter replacement light 3 flashes: filter 3 (activated carbon filter)
has to be replaced.
1. How to replacing the filter 2, filter 3 and filter 4?
Tip: Place the appliance against a wall for more stability when you remove or
insert filters.
1) Switch off the appliance and unplug it. (a)
2) Place your fingers in the recesses of the
side cover and gently pull the top part of the
back cover towards you. Then lift the hooks
at the bottom of the cover out of the bottom
of the appliance. (b)
3) To remove filter 1 (pre-filter), grab the two
projections at the top and pull the filter towards
you. (c)
4) To remove the filter 2 (charcoal filter) which
fixed by velcro with filter 3, just tear it off and
replace the new charcoal filter. (d)
12