Using The Appliance - Blaupunkt Lavender 2041 Bedienungsanleitung

USING THE APPLIANCE

1. Put the plug in the wall socket
All lights go on once and you hear a beep. Then all lights go out again.
2. Press the on/off button to switch on the appliance.
The power light and FAN SPEED 1 (lowest) light on the control panel.
3. AQ(Air Quality)
Built-in air quality sensor can detect air quality, after switching on the applicance,
pressing button to turn on the AQ indicator, the AQ indicator will flash once ,
then show the quality of the air. Please see the following information.
AQ indiacator color
Blue
Yellow
Red
To switch off the AQ indicator, just press the
AQ button.
4. Filter replacement lights
There are total 4 filter as follows:
1) Pre-filter, we suggest you clean it every month.
2) Charcoal filter, we suggest you replace it every 3 months.
3) Activated carbon filter, we suggest you replace it every 6 months.
4) HEPA filter, we suggest you replace it every 6 months.
Note: The filters' lifetime is based to your house air quality and using time, the
above our suggested period is just for your reference. Using the appliance in a
humid environment will reduce the lifetime of activated carbon filter and HEPA
filter.
When flash, you have to clean the Pre-filter, when
flash, you have to replace these filters.
www.blaupunkt.com
Air quality level
Good
Fair
Bad
7
LV 2041
or or icon