9. Unpacking
Caution! The product is heavy. We therefore recommend asking another person for help.
• Place the packaging in upright position.
• Open the lid and cut through both straps.
• Pull the carton box upwards for it to separate from the bottom part.
• Hold the product by its lateral recessed grips, and then pull it upwards to remove.
10. Installing the exhaust hose
• The exhaust hose (9) is located below the exhaust hose cover (3).
• Lift the cover vertically and remove the exhaust hose.
• Slightly extend the end of the exhaust hose apart.
• Screw the exhaust hose onto the cover in clockwise direction.
• Reinsert the cover including the exhaust hose.
• Extend the exhaust hose until the desired length is reached (max. 40 cm).
• Guide the exhaust hose as straight as possible during installation. Do not bend the exhaust hose.
24