Remote Control; Unpacking And Checking - Sygonix 2201954 Bedienungsanleitung

d) Remote Control
E
D
C
B
A

9. Unpacking and checking

Warning! The product is heavy. We therefore recommend that the product packaging is removed by two
people.
• Put the packaging box down the right way up and carefully put it on its side.
• Open the bottom of the packaging and fold the flaps outwards.
• Put the product in the packaging vertical again on its bottom.
• Open the top and remove the cardboard bracket, hang the mains cable and plug on the product in the packaging
box.
• Remove the polystyrene unit containing the small parts. Put it in a safe location.
• Remove the four cardboard brackets and remove the packaging upwards.
• Leave the product standing upright for at least 2 hours before switching it on so that the coolant can settle before
operation.
• Check that all the package contents is there and that there are no signs of damage. If the package contents are not
all there or damaged, do not use the product. Take it back to the dealer immediately.
• If you want to dispose of the packaging material, please follow the statutory regulations.
• Keep the packaging materials, in case you want to pack and store, send or otherwise transport the appliance in
them. Store it so that it does not present a risk.
F
A button
B button
G
C button
H
D button
I
E button
F Infrared LED
G Button
H Button
J
I button
J Battery compartment cover
31