Dmx-Mode; Dmx-Protocol - EuroLite led par-64 rgba Bedienungsanleitung

DMX-Mode

The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the LED PAR-64 RGBA, 10mm will respond to the controller.
Addressing
Press the MODE button until the display shows Add. You can now set the desired address via the UP or
DOWN buttons.
Controlling:
After having addressed the LED PAR-64 RGBA, 10mm, you may now start operating it via your lighting
controller.
Note:
It's necessary to insert the XLR termination plug with 120
proper transmission on the DMX data link.
The device has 2 DMX-modes. The Control Board allows you to assign the DMX-Mode.

DMX-Protocol

6 channel mode
Channel: Value:
1 000 – 255
Channel: Value:
2 000 – 255
Channel: Value:
3 000 – 255
Channel: Value:
4 000 – 255
Channel: Value:
5 000 – 255
Channel: Value:
000 – 000
001 – 005
6
006 – 010
011 – 255
* If the device does not feature Sound Control, then channel 6, value 1-5 is OFF.
4 channel mode
Channel: Value:
1 000 – 255
Channel: Value:
2 000 – 255
Channel: Value:
3 000 – 255
Channel: Value:
4 000 – 255
Function:
Red (0 – 100%)
Function:
Green (0 – 100%)
Function:
Blue (0 – 100%)
Function:
Amber (0 – 100%)
Function:
Dimmer (0 – 100%)
Function:
No function
Sound Control (15 colors) *
ON
Strobe (increasing)
Function:
Red (0 – 100%)
Function:
Green (0 – 100%)
Function:
Blue (0 – 100%)
Function:
Amber (0 – 100%)
24/26
in the last lighting in the link in order to ensure
00048513.DOC, Version 1.1