DESCRIPTION OF THE DEVICE
Features:
RGBAW Flower-effect with LED-technology
DMX-512 control via commercial DMX-controller (occupies 4 channels) • The colorful flower-beams change
their direction of movement at every bass-beat in sound controlled mode • Sound controlled via built-in
microphone • Microphone-sensitivity adjustable via rotary-control • Strobe effect • Auto mode • Chaser speed
adjustable via control panel and DMX • Internal programs • Master/Slave function • Rotation of the flower-
beams adjustable via DMX • Addressing and setting via control panel with 4-digit LED display and four
operating buttons • Equipped with 5 x 3 W LEDs in red, green, blue, white and amber • Rugged housing in
an appealing design • Locking possibility at the mounting bracket • Ready for connection via enclosed IEC
power cord with safety plug
Overview:
Safety rope
MODE
INSTALLATION
Overhead rigging
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
When rigging, derigging or servicing the device staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
1
2
3
UP
DOWN ENTER
Sensitivity
Microphone
4
5
1. Attachment eyelet
2. Control panel with 4-digit LED display
6
3. Operating buttons
4. Microphone
7
5. Sensitivity control
6. DMX In
7. DMX Out
8. Fuse
9. Power supply
8
9
16/22
00056669.DOC, Version 1.3