Weatherdock easyTRX2 S Series Handbuch Seite 75

Page 75 of 108
You may change the radius and the time by clicking on the arrows and
transfer it to the easyTRX2S by clicking on "Program". You can check
the current settings of the transponder by clicking on "Read". The
settings remain in the device i.e. it is not necessary to program it again
after restart.
The CPA alarm can be disabled by pressing the button "CPA-Alarm
ON". Here as well, the settings done with "Program" are applied to
the easyTRX2S and checked with "Read".
CAUTION:
Only vessels, which do have a properly working AIS aboard, are able to
trigger the CPA alert in the easyTRX2S Transceiver!! Therefore you
should always watch out for other vessels which are on collision
course!!!
Abbildung 32-CPA alert
When a CPA alert occurs, two actions are starting:
• LED CPA alert is flashing for a few seconds
Weatherdock AG Sigmundstraße 180 D-90431 Nürnberg
Tel.: +49 911 376638 30 www.weatherdock.de