Mounting Instruction - Megasat Countryman GPS Premium Benutzerhandbuch

6. Mounting instruction

1.
Clean the surface with cleaner.
3.
Attach friction tape outside of the moun-
ting plate by 4mm away from plate edges.
5.
Put back the mounting plate on the sili-
cone applied and make 6holes (2mm) .
7.
Assemble bolts
ENGLISH
16
2.
Fahrtrichtung
Locate mounting plate in the center of
car roof.
4.
Apply glue within the guided tape line
but leave 2cm gap from the line.
6.
Apply glue on the holes.
8.
Re-apply glue to cover bolts assembled
6. Mounting instruction
9.
Apply glue around mounting plate.
11.
Remove friction tape and get dry.
13.
Attach the antenna to the
mounting plate
15.
Equipment to initiate Cable holder
installation
ENGLISH
10.
Tidy the area glue applied.
12.
The image you will see. Place main unit
on the top of fixed plate.
14.
16.
Insert cables like picture.
17