Wet Vacuuming - Cocraft AA12V1 Bedienungsanleitung

4. Carefully pull out the extension
nozzle from the vacuum and fold it
back into place.

Wet vacuuming

Note:
• The vacuum is only designed to vacuum
a small amount of liquid.
• Refer to the capacity mark on
the collector for reference. Never vacuum
more liquid than the capacity marking
indicates.
1. Attach the wet vacuuming nozzle if
needed.
2. Remove the nozzle once you have finished vacuuming, press [
remove the collector, empty it and dry it out thoroughly.
5. Press [
the dust collector, empty it and
clean it.
6
] (6), remove
] (6),