On/Off Button; Dry Vacuuming - Cocraft AA12V1 Bedienungsanleitung

Operating instructions
Note: Never use the vacuum without the filter in place.

On/off button

1. Make sure the power switch is in the OFF position.
2. Insert the power cable into the 12 V
socket of the vehicle.

Dry vacuuming

1. Fold out the extension nozzle (1)
and push it into the vacuum until it
sits securely in place (the vacuum
may also be used without extending
the extension nozzle).
3. Remove the brush nozzle once you have finished vacuuming.
3. Turn the vacuum on/off by sliding
the power switch to the desired
position.
2. Attach the brush nozzle if needed.
Note: The brush nozzle can only be
attached to the extension nozzle.
5