Maintenance; After-Sales Service - Facom CL2.C1913D Bedienungsanleitung

Storage:
We recommend storing your power tools in a dry and temperate location (temperature above 5˚C and below 40˚C) ; your batteries will provide more power.
Heavy use:
- In case of heavy use, allow the machine to cool down a few minutes between each use.
A heat sensor protects the machine by automatically cutting the power supply in case of overheating.

Maintenance:

- Clean the machine with a clean and dry cloth. Do not lubricate. Do not open or dismantle the machine.
- Avoid shock and dropping which will damage the machine; after a shock or a drop, check that the controls operate normally, that the tool has no run out
nor unusual vibration, that the covers have no play, are not cracked nor dented, and that the battery is properly fastened.
In case of abnormal operation: call your FACOM distributor.
Changing the carbon brushes
If you notice a drop in your tool's level of performance, check the condition
of the motor brushes. If required, replace them, as follows:
1) remove the tool's battery to prevent any risk of electrical shock.
2) unscrew the cover protecting the brush (figure 1)
3) remove the used brush (figure 2)
4) fit a new carbon brush instead of the used one (figure 3)
5) screw the protection cover back (figure 4)
6) repeat steps 2 to 5 for the second brush.
To guarantee optimum operation of your tool:
- always replace the 2 carbon brushes simultaneously
- only use FACOM recommended carbon brushes
(CL2.CBN1 , CL2.CBN2).
After-sales service:
- For any question or intervention in the machine, call your FACOM distributor.
Guarantee:
Facom power tools are guaranteed for 24 months from the date of purchase against any defect or manufacturing fault.
Facom accessories and wear parts, charger and batteries are covered by the legally enforced guarantee.
This guarantee does not cover the following cases: normal wear, non compliance of instructions of use and safety guidelines, non-conventional or abusive
use of the tool, tool overloading, lack of servicing or maintenance, intrusion of foreign bodies, tools which have been disassembled or modified, or featuring
traces of shock (dents, cracks or broken covers...), use with poor quality or non compatible accessories.
To use the guarantee, provide: the tool with its serial number as well as the legible and unmarked original invoice designating the product and its date of
purchase.
Detailed conditions of application of the guarantee: call your distributor.
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
Contact your local government for information regarding the collection systems available.
If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging
your health and well-being.
When replacing old appliances with new once, the retailer is legally obligated to take back your old appliance for disposal at least for free of charge.
1
3
2
4
12