Opening With Programmed Td/Ow; Cancellation Of Programmed Td/Ow - Kaba Mauer 82021 Code-Combi K Bedienungsanleitung

4.4.2 Opening with programmed TD/OW

1) Press ON
2) Enter valid code
Automatic start of TD: visual signal every 5 seconds
After end of TD: acoustic signal
Automatic start of OW: visual and acoustic signal every 5 seconds
3) Enter valid code once again during OW period
4) Within 4 seconds turn bar handle clockwise until stop position reached
By pressing the P key during the TD period this function is interrupted. The entire sequence
must then be repeated in order to open again.
3 code entries are possible during the OW period. Following the third incorrect entry the
entire process has to be repeated.

4.4.3 Cancellation of programmed TD/OW

1) Open lock with valid code
2) Press ON
3) Press P
4) Enter valid code once more
5) Press P
Press 1 when TD/OW is entered for
- primary code in parallel mode
- primary code in delegated dual code mode
6) - dual code in ordinary dual code mode
Press 2 when TD/OW is entered for
- secondary code in parallel mode
- dual code in delegated dual code mode
7) Press 000 (set TD/OW on 0 respectively)
CLAVIS Deutschland GmbH
Schillerstraße 47-51
34117 Kassel
Telefon: +49 (0)561 988 499-0
Fax: +49 (0)561 988 499-99
1 x
1 x
/
1 x
1 x
TD/OW
deleted
E-Mail: info@tresore.eu
Internet: www.tresore.eu
www.tresorschloss.de
GB