Lock Functions; Parallel Mode Function; Opening With Primary Or Secondary Code; Opening After 3 Or More Incorrect Code Entries - Kaba Mauer 82021 Code-Combi K Bedienungsanleitung

GB

4 Lock functions

The lock should only be programmed with the lock and safe opened.

4.1 Parallel mode function

4.1.1 Opening with primary or secondary code

1) Press ON
2) Enter valid 6-digit primary or secondary code
3) Within 4 seconds turn bar handle clockwise until stop position reached
If the lock was last opened with a different code, the signal 3 x

4.1.2 Opening after 3 or more incorrect code entries

After 3 incorrect entries the lock goes into a one minute blocked status. The period in which
the lock is blocked is extended to 2, 4, 8 and a maximum of 16 minutes every time an
incorrect code is entered. During this period the red LED fl ashes every second and it is not
possible to enter any further codes. When the blocked period is over, ON may be pressed
again at any time.
1) Press ON
2) Enter valid 6-digit code
Signal: Invalid 6-digit code was entered during former opening attempt 3 x
3) Within 4 seconds turn bar handle clockwise until stop position reached
CLAVIS Deutschland GmbH
Schillerstraße 47-51
34117 Kassel
primary code secondary
Telefon: +49 (0)561 988 499-0
Fax: +49 (0)561 988 499-99
code
appears.

penalty time

E-Mail: info@tresore.eu
Internet: www.tresore.eu
www.tresorschloss.de
1 x
1 x