Technical Data - Milwaukee HEAVY DUTY M18 HCC75R Originalbetriebsanleitung

TECHNICAL DATA

Cable Cutter
Production code
Frequency band
Radio-frequency power
Battery voltage
Nominal force
Cutting range Depends on cable type
Insulated copper / Aluminum cable, lightly
reinforced
Remote Control
Volts
Weight
Weight according EPTA-Procedure 01/2003
(Li-Ion 2,0 Ah...9,0Ah)
Recommended Ambient Operating
Temperature
Recommended battery types
GB
Recommended charger
Noise information
Measured values determined according to EN 62841. Typically, the
A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A)) 73,5 dB (A)
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according
to EN 62841
Vibration emission valuea
Uncertainty K=
WARNING Read all safety warnings, instructions, illustrations and speci cations provided with this power tool.
Failure to follow the warnings and instructions may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
CABLE CUTTER SAFETY WARNINGS
Cutting and splitting of cables with the aid of this cable cutter may
only carried out by personnel trained to work on underground
cables in accordance with local regulations.
To reduce the risk of explosions, electric shock and damage to
property and equipment, never cut live electrical cables. Tool is
NOT insulated.
Keep hands and loose items of clothing away from cutting tools
and other moving parts. There is a risk of serious injury, including
severing of limbs.
The use of protective clothing is recommended, such as dust
mask, protective gloves, sturdy non-slip footwear, helmet and ear
defenders.
Use protective equipment. Always wear safety goggles when
working with the cable cutter.
Prevent accidental starting of the cable cutter. Before connecting
to a removable battery, ensure that the trigger is secured with the
switch lock.
Hold the cable cutter by both handles.
Never hold the cable cutter by the cutting jaws.
English Deutsch
6
M18 HCC75R
4587 20 02...
000001-999999
2402 - 2480 MHz
1,8 dBm
18 V
77,8 kN
max. Ø 75 mm
6 V (1,5 V AA 4x)
0,4 kg
7,6 kg ... 8,2 kg
-18°C ... +50°C
M18B...
M12-18...
84,5 dB (A)
0,2 m/s
2
h
1,5 m/s
2
WARNING!
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 62841
and may be used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for di erent
applications, with di erent accessories or poorly maintained, the
vibration emission may di er. This may signi cantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also take
into account the times when the tool is switched o or when it is
running but not actually doing the job. This may signi cantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the e ects of vibration such as: maintain the tool and the acces-
sories, keep the hands warm, organisation of work patterns.
Before using, always check the cutting jaws for cracks and other
signs of wear.
Only use the cable cutter, removable battery and charger if they are
in perfect technical condition.
Have damage repared immediately by an authorised workshop.
Remove the battery pack before starting any work on the
appliance.
The cable cutter may only be used with a cutting tool inserted.
Remove any setting tools and wrenches before making the cut.
To avoid injury and damage, never immerse the tool, removable
battery or charger in liquid or allow liquid to penetrate them.
Use only System M18 chargers for charging System M18 battery
packs. Do not use battery packs from other systems.
Never break open battery packs and chargers and store only in dry
rooms. Keep dry at all times.
To reduce the risk of re, personal injury, and product damage due
to a short circuit, never immerse your tool, battery pack or charger
in uid or al-low a uid to ow inside them. Corrosive or conductive
uids, such as seawater, certain industrial chemicals, and bleach or
bleach containing products, etc., Can cause a short circuit.