cosori CP018-PC Bedienungsanleitung Seite 28

9. Place the lid back onto the
handle by aligning the slot
on the lid with the bolt on
the handle. Make sure it is a
snug fit.
10. Screw the retainer nut back
on to secure the lid turning it
clockwise until it cannot be
turned any further.
28
SILICONE SEALING RING
INSTALLATION
NOTE:
Make sure the silicone sealing ring is
not cracked or damaged in any way.
Removal
1. Remove pressure cooker lid as noted
in the Lid Maintenance section.
2. Carefully take the lid off of the
handle.
3. While holding the lid in place,
gently pull out the silicone
sealing ring.