Operating Lights - Andres Industries TILO-3M Handbuch

TILO - 3™
Safety Notice!
!
Do not blaze directly into the eyes when using the
high brightness levels.
Take special care when using the IR LED. Since the
light is invisible, the adverse-effects reflex of the eye
(eyelid reflex) does not work. Therefore, when using
the IR light, an eye hazard has to be avoided.
Operating thermal image
Eyelet for lanyard
Button 2
Press and hold: Change filter
Press briefly: Zoom
The zoom levels are:
0.8 (better overview)
×
1
×
2
×
4
×
8
×
Button 1 & 2
Press both buttons long:
Thermal mode on / off
(For example, if flap is damaged)
Button 1
Press briefly:
Display brightness alternating
Button 1 & 4
Start menu:
Press both button long
24
Quick Start Guide
Valid for:
TILO - 3Z™
TILO - 3Z+™
TILO - 3M™
Eyecup
(option)
Turn on:
1. Slide cover in the direction of the arrow
2. The cover opens automatically
3. Device starts automatically
Helmet adapter
(option)
3 3
4 4
2 2 2
1 1
Battery ompartment
for1 CR123
×
Turn off:
1. Close the cover
2. Lock by sliding it against the direction
of the arrow

Operating lights

Button 3
Press briefly: Brightness alternating
Press and hold: Change mode
The modes are:
– permanently steady light
– Blinking flashing light
– SOS
Button 3 & 4
Press both buttons long:
IR mode on / off
Button 4
Long: light on (as last used)
Long: color change (red & white)
Short: light off
In IR mode
Long: IR check
– when IR continuous light is switched on:
Red light flashes 3 long
×
– when IR flashing is activated:
Red light flashes 5 short
×
– when in IR-SOS mode:
Red light flashes in IR-SOS mode
External power supply
25