Master-Slave Mode; C) Operation With Static Colours - Renkforce RDM PAR-Spot 6 x 10 W Bedienungsanleitung

b) Master-Slave mode
• Set the option NASt in the menu SLAu to define the device as a master (control via the installed control-
ler).
• Set the option SLAu in the menu SLAu to define the device as a master (control via the installed control-
ler).
If the device is to be operated as a single device (standalone), it must be defined as a master
device.
Only one device in a master-slave-chain must be defined as master device. All other devices
must be defined as slave devices.

c) Operation with static colours

• Set the option coLi in the menu chAS to operate the device with static colours.
• Select the desired colour (cL.01-cL.31).
• Table of static colours
Setting Colour
cL.01 red
cL.02 green
cL.03 blue
cL.04 amber
cL.05 yellow
cL.06 pure white
cL.07 magenta
cL.08 red-orange
cL.09 light blue
cL.10 green yellow
cL.11 light pink
cL.12 warm white
cL.13 orange
cL.14 light green
cL.15 purple
cL.16 yellow-orange
cL.17 white
cL.14 light blue
cL.19 pale yellow
cL.20 pink
cL.21 teal
Setting Colour
cL.22 pink
cL.23 light red
cL.24 bright green
cL.25 azure
cL.26 pale red
cL.27 pale green
cL.28 pale blue
cL.29 beige
cL.30 blue white
cL.31 cold white
31