Preparation For Use - Teesa tsa3223 Bedienungsanleitung

Owner's manual
1. Remove the device from the packaging and peel off any labels.
2. Place the device on dry and flat surface.
3. Make sure the power supply socket is nearby.
4. Before first use, clean the plates with a soft and damp cloth and then
wipe them dry.
5. Make sure the grease drip tray is assembled.
6. Make sure the plates are inserted correctly.
7. Open the cover and apply a layer of vegetable oil or butter on the plates
using kitchen towel or brush for dough. If necessary wipe off any excess
oil.
8. Close the cover and insert the plug into supply socket. Red and green
indicators turn on.
9. Use the Thermostat knob to set the temperature which is appropriate to
the type of food that is being prepared.
Note: Remember that the actual grilling time and temperature depend
on the type of food that is being prepared, its thickness and individual
tastes.
10. Wait until green light goes off; it means that the plates reached the
grilling temperature. The device is now ready to be used.
Notes:
• It is normal for the green light to go on and off while the device is
operating. It means that the device keeps the grilling temperature.
• Hot steam can emit from the cover of the grill during operation. Please
exercise caution.
• Initially, the appliance may release an odor. This is a normal reaction
caused by initial heating of the plates and should not reoccur.

PREPARATION FOR USE

17
EN