Teesa tsa3223 Bedienungsanleitung Seite 16

16
1. Handle
2. Lower casing
3. Power light (red)
4. Thermostat knob
5. Heating light (green)
6. Upper cover
7. Upper plate release button
8. Grease outlets
9. Upper cover release switch
10. Lower plate release button
11. Upper plate
12. Lower plate
13. Grease drip tray
Removing:
1. Open the upper cover.
2. Press the upper plate release button to release and remove the upper
plate. Press the lower plate release button to release and remove the
lower plate.
Inserting:
1. Put the upper plate in the upper cover, then press and hold upper plate
release button and push the plate downwards.
2. Release the button.
EN
3. Repeat the above steps with the lower plate to insert it.
4. Check if the plates are assembled correctly.
Warning! Before removing or inserting heating plates make sure the device
has cooled down after operating. Never replace the plates when the device
is still hot.
ASSEMBLING AND DISASSEMBLING OF PLATES
Owner's manual