Functional Description - Bosch GSR ProDrive Professional Originalbetriebsanleitung

OBJ_BUCH-747-002.book Page 15 Monday, May 26, 2008 10:30 AM
Use the battery only in conjunction with
your Bosch power tool. This measure alone
protects the battery against dangerous over-
load.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for driving in and loos-
ening screws.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Screwdriver bit*
2 Tool holder
3 Battery unlocking button
4 Battery*
5 On/Off switch
6 Rotational direction switch
7 "Power Light"
*The accessories illustrated or described are not in-
cluded as standard delivery.
Bosch Power Tools
Technical Data
Cordless Screwdriver
Article number
Rated voltage
No-load speed
Max. torque for
hard/soft screwdriving
application according
to ISO 5393
Max. screw dia.
Weight according to
EPTA-Procedure
01/2003
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted sound pressure level of
the product is less than 70 dB(A). Uncertainty
K =3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Screwdriving without impact: Vibration emis-
2
sion value a <2.5 m/s , Uncertainty
h
2
K =1.5 m/s .
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
1 609 929 R40 | (26.5.08)
English | 15
GSR ProDrive
Professional
3 601 JA2 0..
V= 3.6
rpm 0 – 250
Nm 7/3
mm 5
kg 0.5