Specifications; Operating Conditions - Axis P13 Serie Installationsaleitung

RS485/RS422 Connector
Two terminal blocks for RS485/RS422 serial interface used to control auxiliary equipment such as
pan-tilt devices.
SD Card Slot
NO TICE NO NO TICE TICE
• Risk of damage to SD card. Do not use sharp tools or excessive force when inserting
or removing the SD card.
• Risk of data loss. To prevent data corruption, the SD card should be unmounted before
removal. To unmount, go to Setup > System Options > Storage > SD Card and click
Unmount.
This product supports microSD/microSDHC/microSDXC cards (not included).
For SD card recommendations, see www.axis.com
Control Button
For location of the control button, see Hardware Overview on page 10.
The control button is used for:
• Enabling the Focus Assistant. Press and very quickly release the Control button
• Resetting the product to factory default settings. See page 19.
• Connecting to an AXIS Video Hosting System service or AXIS Internet Dynamic DNS
Service. For more information about these services, see the User Manual.

Specifications

Operating Conditions

Note
The Axis product is intended for indoor use. To use the camera outdoors, it must be
installed in an approved outdoor housing. Please see www.axis.com for more information
on outdoor housings.
Products
AXIS P1354
AXIS P1357
Temperature
0 ºC to 50 ºC
(32 ºF to 122 ºF)
13
AXIS P13 Series
Humidity
10-85% RH
(non-condensing)