Repeat Function - oneConcept 10021807 Gebrauchsanleitung

Playing a CD
NOTE: Never touch the laser lens inside of the CD compartment. Clean the laser lens with
a CD cleaner disc if it becomes dirty.
1. Press the Standby button to turn on the unit
2. Press the Function Switch to CD mode.
3. Open the CD DOOR and insert a CD into the tray with printed label side facing up.
4. Close the CD DOOR and the disc will rotate for a few seconds and then stop.
5. Use the SKIP- or SKIP+ button to choose a track
6. Press the PLAY/PAUSE BUTTON to start play
7. Press the PLAY/PAUSE BUTTON again to PAUSE play.
8. To stop the album temporarily, press PAUSE button, to resume, press again.
9. Press the STOP BUTTON to STOP play.
MP3 Disc section
NOTE: Because MP3 discs have a large capacity, disc access times are a little longer.
1. Press the Standby Button to turn on the unit.
2. Press the Function Button to CD Mode.
3. Open the CD Door and the disc will rotate for a few seconds and then play automatically.
4. Press the SKIP+/SKIP- button on the device/ on the remote to skip to the next/previous
track.
5. Press the Remote M+/M- to skip 10 tracks and choose the select track.
6. To stop the album temporarily, press PAUSE button, to resume, press again.
7. Press the STOP BUTTON to STOP playing.

Repeat function

The CD REPEAT Button may be used to repeat a single track or repeat all tracks on a com-
pact disc.
1. Press the REPEAT button once during playback, the "
play. The same track will be repeated over and over.
2. Press the REPEAT button a second time to repeat all tracks. The "
on the LCD display.
3. Press the REPEAT button a third time to repeat the current folder. The "
show on the LCD display.
4. To cancel REPEAT PLAY, Press the REPEAT BUTTON repeatedly until the all sign disap-
peared.
1" sign will show on LCD Dis-
ALL" sign will show
" sign will
15