115 V umgeschaltet werden. Der Netzschalter be- Ausgangs-Taktrate angepasst. findet sich auf der Frontseite. Der eingeschaltete In der Grundversion verfügt der SRC F24 über drei Zustand wird durch eine LED neben dem Netz- digitale Eingänge - AES/EBU, S/P-DIF koaxial und schalter angezeigt.
DIE DIGITALEN AUSGÄNGE LED's angezeigt. Signale die ausserhalb dieser Toleranz liegen, Der SRC F24 stellt zwei digitale Ausgänge zur aber innerhalb des gültigen Arbeitsbereiches Verfügung. Das Datenwort ist bei beiden Ausgän- von ca. 28 - 56 kHz, werden über die "VA- gen gleich, unabhängig von der Norm oder Bau-...
Seite 4
chende Quelle aufgeschaltet: Feld angezeigt. Wenn dort ein gültiges Datenwort oder ein kor- rekter Takt anliegt, leuchtet die zugehörige LED. HINWEIS: Wenn das Datenwort oder der Takt als fehler- Die jeweils letztgewählte Frequenz wird beim Auf- haft erkannt werden, blinkt die zugehörige LED rufen des internen Oszillators durchgeschaltet und und die Ausgänge werden stummgeschaltet.
Signale oder das Sync-Signal nicht fest sind. Veränderungen der Samplingfrequenz und einige Die verschiedenen Zeiten sind an der Rückseite andere Daten werden korrekt hinzugefügt. Siehe des SRC F24 über bezeichnete DIP-Schalter ein- hierzu auch die Aufstellungen auf einer der folgen- stellbar. den Seite.
LED next to the power switch. A output sample-rate selected. generously dimensioned toroidal transformer deli- In its basic version, the SRC F24 is equipped with vers the internal supply voltages. three digital inputs, AES/EBU, S/P-DIF coaxial plus S/P-DIF optical. The desired input is activated by pushbuttons on the front panel.
Possible sampling rate informations within the data word will be ignored. THE DIGITAL OUTPUTS HINT... The SRC F24 offers two digital outputs. The data Since there is no professional/consumer coding word is identical at both, regardless of their stan- enclosed in SDIF-2 signals, no information dard.
Seite 9
AUTO MODE SAMPLING RATE DISPLAY In order to keep operation easy and to achieve op- timum results, the SRC F24 is equipped with an Four LEDs inform about the output signal's sam- (overridable) automatic delay and lock time setting pling frequency. The frequency depends on the function: sync signal selected.
THE DIGITAL OUTPUT FORMAT THE PC INTERFACE All data contained in the digital input signal are car- By means of the optional V24 interface and the ried to the output data word. Alterations in sam- software included, the status of input and output pling frequency and some more data are correctly signal can be monitored and modified.